Car Detailing: A Beginners Guide To Cleaning Your Ride

Hand washing a car is not an easy task for most people. However, with enough knowledge, you will realize this is not an all-inclusive procedure. It takes step by step to have a clean and shining car. Washing your car should not be a challenging task. You only need to know the correct procedure, and within two or three washes down the line, you will almost do it like a pro. Here is a beginner guide for car detailing.

1. Preparation

This is the most crucial part of car detailing. You need to ensure you have everything handy before you start washing. Gather items like buckets, a hose, water supply, and others. Don’t forget to remove jewelry, rings, or buckled belts. Also, don’t forget that Investing in the best car detailing supplies is essential if you want to get the desired result.

2. Pre-Washing

After gathering everything you need, it is time to start washing. Use the hose water to clean dirt from the top of the car to the bottom, and don’t forget to clean the tires too.

3. Washing Tires And Wheels

Washing your tires and wheels is more important than you might think. It helps keep your car looking great, but it also prevents problems that can cause serious issues. For example, if you have low-profile tires and your car drives over gravel or crushed stone, then it can get badly scratched, which is not only unattractive but makes it harder for the car to drive.

Use a soft tire brush and foam car wash soap to remove the dirt and dust from the wheels. Make sure you also clean the tight parts like the nuts and spokes. Always ensure you rinse the bucket thoroughly before using it to clean the other parts of the car.

4. Cleaning The Surface

It may be a good idea to start washing the interior before the exterior. Remove all the personal items and vacuum the upholstery. You can use a car interior cleaner to detail and condition the interior surfaces.

After washing the interior, you are now ready to clean the paint. You will need to go slow here if you want the best results. Make sure you don’t wash your ride on a hot afternoon. When cleaning, wash each panel at a time to ensure you have enough time to rinse to avoid leaving water streaks and spots. Always wash the car from the top to the bottom to push the dirt to the bottom.

5. Drying The Car

The best way to leave the surface spotless is by using microfiber towels to dry the surface. Do it the same way you did when washing -starting from top to bottom. After drying the car, a scratch and swirl remover can be of great help to ensure no marks are left on the paint.

6. Waxing

You will need to shine the surface before closing the job. However, before doing that, you want to ensure the surface is as smooth as possible. Use a clay bar to smoothen and remove the bumps on the paint. Ensure you also use the best polish and wax to add a layer of protection.

Final Remarks

These are simple steps for pro-car detailing. Remember, the more you hand wash the car, the better you get with time. Be ready to learn from your mistakes and choose the best cleaning supplies.